Raymarine Marine GPS System - Using the Upwind, Downwind, and Vmc Plot Screens

Working With Charts And Routes
4-23
To rename a waypoint group:
1. Double-click on a waypoint (or select Edit Route from
the Route menu, then click Waypoint Properties) to
display the Waypoint Properties dialog box (Figure 4-20).
2. Click the Group Name drop-down menu, then select the
group you want to rename.
3. As shown in Figure 4-20, click Groups to display the
Group Action popup menu.
4. Select Rename Waypoint Group. The Rename Waypoint
Group dialog box is displayed (Figure 4-22).
5. Type the name for the new group, then click OK.
Figure 4-22. Renaming a Waypoint Group
Click
Groups
on Waypoint
Properties dialog to display
Group Action popup, then
select Rename Waypoint Group