Chapter 14: RNS mode 141
14.3 Installing the RNS keyboard
The keyboard has been designed as a ‘plug and play’ device. Installation is
a simple matter of plugging it into an unused USB port on the computer
that you are using to run RayTech.
14.4 Setting up RayTech for use with the RNS
keyboard
To set up RayTech for use with the keyboard:
1. Open RayTech as described in “Getting started” on page 15.
2. Select Window/RNS Mode.
The window will now change to show the RNS mode.
142 RayTech RNS V6.0 - Users Guide
To Next Page
Loading...
Need help?
General