What to do if my Raymarine Dragonfly GPS system doesn't start up?
If your Raymarine GPS system fails to start, the issue likely lies within the power supply. Here's what you should check: * Examine the relevant fuses and breakers. * Inspect the power supply cable for any damage, ensuring all connections are secure and free of corrosion. * Verify that the power source provides the correct voltage and sufficient current.
Why are my Raymarine Dragonfly depth readings problematic?
Problematic depth readings or on-screen images on your Raymarine system can arise from several factors: * Sensitivity settings: Check that the sensitivity settings are appropriate for the current conditions. * Power supply: Verify the voltage from the power supply; a low voltage can affect the unit's transmitting power. * Cable connections: Ensure the power/transducer cable is properly connected and undamaged. * Transducer location and condition: Confirm the transducer is installed according to location requirements, is clean, and hasn't been dislodged. * Vessel speed: Turbulence around the transducer at high speeds can interfere with readings. * Scroll speed: Adjust scroll speed.
Why does my Raymarine Dragonfly GPS display behave erratically?
Erratic behavior in your Raymarine GPS display, such as frequent resets or system crashes, can stem from a few potential causes: * An intermittent power supply issue: Inspect the relevant fuses and breakers, the power supply cable (looking for damage, loose connections, or corrosion), and ensure the power source provides the correct voltage and sufficient current. * Corrupt data or other unknown issues: You can perform a Settings and Data Reset. Note: This will erase all settings and data (waypoints, etc.) stored on the product, so save any important data to a memory card first.
What to do if Raymarine Dragonfly shows no GPS position?
If your Raymarine GPS isn't showing a position, it could be due to: * Your current geographic location or prevailing conditions preventing a satellite fix. Check periodically to see if a fix is obtained in better conditions or another geographic location. * The unit's location. For optimal performance, ensure the unit is mounted above decks, away from structural bulkheads, other electrical equipment, or cables that may cause interference.
General statements about product limitations and responsibilities for navigation.
Information on compatible memory and chart cards for data storage and upgrades.
Guidelines for minimizing electromagnetic interference during installation.
Details on third-party software licenses applicable to the product.
Statement of compliance with essential EMC directive requirements.
Policy regarding the acceptable number of defective pixels on the display.
Details of the product's limited warranty period and terms.
Instructions on how to register product ownership for warranty benefits.
Guidance on proper disposal of the product according to WEEE Directive.
Clarification of the equipment's intended use on leisure marine boats and workboats.
Disclaimer regarding the accuracy and currency of information in the document.
Information about the purpose and content of the installation manual.
A general overview of the Dragonfly product and its features.
A step-by-step checklist of activities required for installation.
Lists the components included with the product for installation.
Information on transducers compatible with the Raymarine Dragonfly.
Lists the necessary tools for performing the installation.
Information on how to update product software for new features and performance.
Important warnings and cautions related to installation procedures.
Guidance on choosing the optimal location for mounting the transducer.
Instructions and best practices for routing transducer cables to avoid interference.
Guidance on selecting a suitable location for mounting the display unit.
Outlines the sequential steps for successfully installing the product.
Detailed steps for initial mounting of the transducer on the transom.
Instructions for mounting the display's cradle onto a surface.
Steps for securely attaching the display unit into its mounting cradle.
Instructions for mounting the 7-inch display in the cradle in the 'cradle down' orientation.
Information on securing the display unit to the cradle using a lock.
Procedure for safely removing the display unit from its mounting bracket.
Steps for surface mounting the display unit using the optional adaptor kit.
Procedures for testing the transducer's performance before final installation.
Steps to lock the transducer into its final position after testing.
General advice on using appropriate cables and routing them correctly.
Details on connecting the power and transducer cable to the display unit.
Instructions on how to power the display unit on and off.
Overview of the display unit's physical controls and their functions.
Guidance on initial setup procedures, including the startup wizard and tutorial.
How to check the GPS receiver status and configuration.
Procedure for verifying the functionality of the sonar application.
Procedure for verifying the functionality of the DownVision application.
Accessing and using the shortcuts page for quick access to functions.
Overview of the different applications available on the display.
Using the view switcher to select and manage display views.
Information on using MicroSD memory cards for data archiving and backup.
Instructions for saving waypoints, tracks, and user settings to a memory card.
Procedures for resetting system settings, data, or sonar to factory defaults.
An overview of the chart application's features and uses.
Explanation of controls for Motion and Cursor modes within the chart application.
Accessing and using the chart context menu for positional data and options.
How to navigate to cursor locations and waypoints using the chart application.
How to select different cartography types for display on the chart.
Setting the chart orientation between North Up and Course Up.
Adjusting the level of detail displayed on the chart.
Changing the display position of the vessel icon on the chart.
Displaying User Generated Content (UGC) on the chart if supported.
Displaying the Course Over Ground (COG) vector on the chart.
Configuring the deep water color shading feature on the chart.
Displaying additional information for cartographic objects on the chart.
Explanation of waypoints and how they are used for navigation.
Information on creating, saving, and managing tracks of your vessel's path.
How to import and export waypoints and tracks using a memory card.
Details on the storage capacity for waypoints and tracks on the display.
An overview of the sonar application, its features, and interpreting sonar images.
Explanation of controls for Sonar and DownVision in Scrolling and Cursor modes.
Adjusting the depth range displayed on the sonar screen.
Customizing display modes, zoom, and other options for sonar.
Adjusting sensitivity, contrast, noise filter, and color palette for optimal sonar performance.
Overview of the DownVision application, its detailed structure view, and image interpretation.
Explanation of controls for Sonar and DownVision in Scrolling and Cursor modes.
Adjusting the depth range displayed on the DownVision screen.
Customizing display modes, zoom, and other options for DownVision.
Adjusting sensitivity, contrast, noise filter, and color palette for optimal DownVision performance.
Configuring alarm behavior for various situations and hazards.
Accessing and configuring system-wide settings like language, units, and GPS.
Functions for backing up, restoring, and resetting system data and settings.
Information on product service, maintenance, and routine equipment checks.
Best practices for cleaning the display unit and its components.
Procedures for cleaning the transducer to ensure optimal performance.
General information on diagnosing and correcting common marine electronics installation problems.
Solutions for problems encountered when powering up the system.
Troubleshooting steps for issues related to the GPS receiver.
Solutions for common issues with Sonar and DownVision data and images.
Troubleshooting for erratic display behavior and other miscellaneous issues.
Information on how to contact Raymarine customer support via web, phone, and email.
Detailed technical specifications for the display and transducer.
List of available accessories for the Raymarine Dragonfly product.
To Next Page
General