1.Powerdrill.
2.Pozidrivescrewdriver.
3.3mm(5/32)Allenkey.
4.Marinegradesealant.
5.Suitablesizeddrillbit.
6.Adhesivetape.
7.18mm(23/32”)Holesaw(onlyrequiredifyouarerouting
thecablethroughthetransom.
Additionaltoolsrequired
Whensurfacemountingthedisplaythefollowingadditionaltools
arerequired.
1.Jigsaw.
2.32mm(11/4”)holesaw.
3.7mm(9/32”)spanner.
4.File.
3.5Softwareupdates
Thesoftwarerunningontheproductcanbeupdated.
•Raymarineperiodicallyreleasessoftwareupdatestoimprove
productperformanceandaddnewfeatures.
•Youcanupdatethesoftwareforyourproductusinga
connectedandcompatiblemultifunctiondisplay.
•Refertowww.raymarine.com/software/forthelatestsoftware
updatesandthesoftwareupdateprocedureforyourproduct.
•Ifindoubtastothecorrectprocedureforupdatingyour
productsoftware,refertoyourdealerorRaymarinetechnical
support.
Caution:Downloadingsoftware
updates
Thesoftwareupdateprocessiscarriedoutatyour
ownrisk.Beforeinitiatingtheupdateprocess
ensureyouhavebackedupanyimportantles.
Ensurethattheunithasareliablepowersupply
andthattheupdateprocessisnotinterrupted.
Damagecausedbyincompleteupdatesarenot
coveredbyRaymarinewarranty.
Bydownloadingthesoftwareupdatepackage,you
agreetotheseterms.
18
Dragony/Dragony7