What to do if Raymarine SiriusXM SR200 has no power?
If your Raymarine Receiver has no power, try turning the power on. If that doesn't work, check the power source and cable connection to ensure they are properly connected.
Critical safety warnings for installation and operation.
Guidelines for minimizing interference and disclaimer on water ingress.
Procedures for disposal, warranty, and legal disclaimers.
List of all components included in the product package.
List of necessary components or services not included.
Pin identification and description for various cables used with the receiver.
Steps for mounting and physically installing the InfoLINK Receiver unit.
Guidance on connecting, extending, and protecting the receiver's power cable.
Instructions for connecting the network and optional audio cables.
Guidance on selecting an optimal location for antenna mounting.
Instructions for installing the antenna using surface mounts.
Instructions for installing the antenna using the low-profile surface mount.
Instructions for installing the antenna using the pedestal mount.
Guidance on mounting the antenna using an extension mast.
Instructions for mounting the antenna using a rail mount.
Steps to confirm the receiver is functioning correctly after installation.
Guide on subscribing to SiriusXM marine weather and radio services.
Guide to diagnose and resolve common issues with the receiver.
Explains the meaning of different LED status indicators on the receiver.
Explains common messages displayed on the MFD and their reasons.
Contact information and resources for obtaining technical support.
Technical details and dimensions of the InfoLINK Receiver and its components.
Regulatory compliance statement regarding FCC rules.
Information on intellectual property rights related to the product.
Information on waste disposal, trademarks, and legal notices.
To Next Page
General
