What to do if Raymarine AIS350 shows no vessel data?
If your Raymarine multifunction display isn't showing vessel data, ensure the AIS DATA soft key isn't set to OFF when you place the cursor over the targeted vessel. Also, verify that the AIS layer is set to ON and that displayed target types are set to ALL.
What to do if Raymarine Receiver has no data?
If your Raymarine Receiver isn't showing any data, check that all connections are secure throughout the system and that the VHF antenna lead is securely connected.
How to fix Raymarine Receiver when there is no power?
If your Raymarine Receiver has no power, check all power connections and relevant fuses. Also, ensure that the power supply provides the correct voltage (12 V or 24 V).
What to do if my Raymarine AIS350 Receiver shows no data?
If your Raymarine Receiver isn't displaying any data, ensure that all connections throughout the system are secure. Also, verify that the VHF antenna lead is securely connected.
How to troubleshoot a Raymarine AIS350 with no power?
If your Raymarine Receiver has no power, check all power connections and relevant fuses. Also, ensure that the power supply is at the correct voltage (12 V or 24 V).
General| Type | AIS Receiver |
|---|---|
| Channels | 2 |
| Sensitivity | -107 dBm |
| Interface | NMEA 0183 |
| Waterproof Standard | IPX6 |
| Frequency | 162.025 MHz |
| Frequency Range | 156.025 MHz - 162.025 MHz |
| Power Supply | 10-32 V DC |
| Current Consumption | 100 mA |
| Operating Temperature | -15°C to +55°C |
| Interfaces | NMEA 0183 |
To Next Page
