What to do if Raymarine AIS650 shows no vessel data?
If your Raymarine multifunction display isn't showing vessel data, ensure the AIS DATA soft key isn't set to OFF when you place the cursor over the targeted vessel. Also, verify that the AIS layer is set to ON and that displayed target types are set to ALL.
What to do if Raymarine Receiver has no data?
If your Raymarine Receiver isn't showing any data, check that all connections are secure throughout the system and that the VHF antenna lead is securely connected.
How to fix Raymarine Receiver when there is no power?
If your Raymarine Receiver has no power, check all power connections and relevant fuses. Also, ensure that the power supply provides the correct voltage (12 V or 24 V).
What to do if my Raymarine AIS650 Receiver shows no data?
If your Raymarine Receiver isn't displaying any data, ensure that all connections throughout the system are secure. Also, verify that the VHF antenna lead is securely connected.
How to troubleshoot a Raymarine AIS650 Receiver with no power?
If your Raymarine Receiver has no power, check all power connections and relevant fuses. Also, ensure that the power supply is at the correct voltage (12 V or 24 V).
Crucial safety warnings, installation precautions, and navigation advice for product installation and operation.
Guidelines on product cleaning, EMC installation, suppression ferrites, and connections to other equipment.
Details on SeaTalkng, NMEA2000, and NMEA0183 connectivity standards for data exchange.
Identification and overview of the AIS350 receiver unit and its components.
General guidance on cable types, routing, and connection best practices for optimal performance.
Guidance on connecting the unit to the vessel's power supply safely with fuse protection.
Site requirements and instructions for mounting the AIS unit to ensure proper operation.
Common issues and solutions for the AIS350 receiver, covering power, data, and vessel data problems.
Essential vessel data (MMSI, name, type) required for AIS650 configuration before operation.
Regulatory requirements and FCC compliance for marine AIS usage in North America.
Checklist and guidance for planning the AIS650 installation process, including equipment and tools.
Instructions for connecting the GPS antenna to the AIS650 transceiver for positioning.
Guidance on connecting the unit to the vessel's power supply safely with fuse protection.
Site requirements and instructions for mounting the AIS transceiver and GPS antenna.
Common issues and solutions for the AIS650 transceiver, covering power, data, and diagnostics.
Information on how to contact Raymarine customer support for assistance via web, phone, or email.
Listing of SeaTalkng compatible cables, connectors, and accessories for system expansion.
Listing of available spare parts and accessories for the AIS receiver/transceiver units.
General| AIS Type | Class B |
|---|---|
| Transmit Power | 2 W |
| Sensitivity | -107 dBm |
| NMEA 0183 Output | Yes |
| NMEA 2000 Compatible | Yes |
| Integrated GPS | Yes |
| Display | No |
| Interface | NMEA 0183, NMEA 2000 |
| Channels | Dual channel |
| Frequency Range | 156.025 MHz to 162.025 MHz |
| Operating Temperature | -15°C to +55°C |
| Weight | 0.5 kg |
| AIS Class | Class B |
To Next Page
