11
5. Make sure that every other line is a red ’ACK’ as shown below. If it is not, power off the course computer and then power
it on again.
6. Select Download and click on Download application.
7. In the dialog box, select *.BIN file required for download.
CAUTION: DO NOT SWITCH OFF POWER TO THE COURSE COMPUTER DURING THE FILE DOWNLOAD!
8. The Download will take 30 seconds to 1 min and the message Download Successful will be displayed.
9. Power OFF the Course Computer and disconnect the download cable.
10. The software upgrade is now complete and the Course Computer is ready for use.
To Next Page
Loading...
