8 ST60 Tridata Instrument Owner’s Manual
3. Press any other key to leave the illumination-adjust mode.
Note: The display will also return to normal operation 7 seconds after
the last key press.
Contrast
To adjust the display contrast:
1. Holddown the
depthkey for approximately two seconds, to enter the
contrast-adjust mode.
2. There are four preset contrast settings. Use the
depth keytocycle
through these settings until you achieve optimum display quality.
3. Press any other key to leave the contrast-adjust mode.
Note: The display will also return to normal operation 7 seconds after
the last key press.
1.5 Remote control
When it is connected to SeaTalk, the ST60 Tridata instrument can be
controlled remotely with a SeaTalk Remote Keypad Unit. Remote
control of an instrument is indicated by a REMOTE legend on the display,
to indicate that the keypad has control.
Details on how to use the remote control facility can be found in the
SeaTalk Remote Keypad Owner’s Handbook.
81040_1.book Page 8 Thursday, November 7, 2002 10:21 AM
To Next Page
Loading...
