EasyManuals Logo

Raypak 406A Installation And Operation Manual

Raypak 406A
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Gas-Fired Pool
and Spa Heater
E󰀨ective: 11-10-21
Replaces: 08-27-21
P/N 241236 Rev. 41
A
S
M
E
HLW
INSTALLATION AND
OPERATION MANUAL
Bronze ASME and Polymer
Atmospheric Heat Exchanger Models
206A, 266, 266A, 336A, 399, and 406A
This manual should be maintained in legible condition and kept adjacent to the heater or in a safe place for future
reference.
A
WARNING: If the information in the instructions is not followed exactly, a re or explosion may result
causing property damage, personal injury or death.
- Do not store or use gasoline or other flammable vapors and liquids or other combustible materials in
the vicinity of this or any other appliance. To do so may result in an explosion or fire.
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or the gas supplier.
BR models only
PRELIMINARY
UNCONTROLLED DOCUMENT IF PRINTED

Other manuals for Raypak 406A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Raypak 406A and is the answer not in the manual?

Raypak 406A Specifications

General IconGeneral
Model406A
CategoryGas Heater
BTU Input400, 000 BTU/hr
Fuel TypeNatural Gas or Propane
IgnitionElectronic
Maximum Water Flow Rate (GPM)120 GPM
Vent Diameter6"
Water Connections2"

Related product manuals