24
Printing
Add resin
Make judgement whether it is necessary to add resin
according to the remaining amount in the resin tank
and the consumption of next printing task.The bottle
which is containing the resin material should be
shaking up and down adequately just before pouring
the resin material into the resin tank.
The liquid level of the resin should be kept between
line " min" and "max".
Contacting with resin directly may lead to
skin irritation, and please wear disposable
gloves in any operation which was related to
resin material.
If you eat the resin by mistake, please seek
for medical care immediately.
The bubble generated by shaking does not affect
the print quality.
Print
Click the "PRINT" button to initiate the task, then wait
for completion of printing.
To Next Page
Loading...