Differences MP150 – MP50
32 Rev. B4 Aug 2019 MP150 Protocol
6 Differences MP150 – MP50
• The PS command takes more time to return (max 3 sec.).
• The MP50 did not send the trigger byte as described in the manual. With 5 V at the input it sends
0 and with 0 V it sends 1 - it is described opposite.
The MP150 is doing it like the manual says: 5 V - 1 and 0 V – 0.
• The GBR command answers with BR9600 instead of BR09600 (what MP50 does).
To Next Page
Loading...