EasyManua.ls Logo

Razor Dirt Quad - Before You Begin; Assembly and Setup Time; Required Tools and Torque Specs

Razor Dirt Quad
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the Dirt Quad was 95 percent assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 20 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR RAZOR
DIRT QUAD
. The Dirt Quad
has been built to certain Razor
design specifi cations. The
original equipment supplied at
the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may or may not be
compatible.
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied
tools only as a last resort.
Need Help?
Visit our web site for updates and a list of authorized service centers at
www.razor.com
or call toll-free
at
866-467-2967
Monday - Friday 8:00 AM - 5:00 PM Pacifi c Time.
2.5
mm
,
5mm and 6mm
hexagonal key
wrenches
(included)
Brake Lever
Brake Lever
Adjuster
Wheel
Tire
Speed Control
Drive
Chain
Front Fork
Charger
Charger
Plug
Charger
Port
Phillips
screwdriver
10
mm w
rench
Bicycle-style tire pump for
Schrader valve tires, with
pressure gauge
or
Bolt Assembly
Torque Chart
ft-lb (Standard Metric 8.8
hardware for Razor Products)
The torque values in the
table are based on the use of
lubricated threads. Reduce
15% for dry threads.
Size (mm) Torque in Ft-lb
6 5
7 9
8 17
10 33
12 60
N•m (Standard Metric 8.8
hardware for Razor Products)
The torque values in the
table are based on the use of
lubricated threads. Reduce 15%
for dry threads.
Size (mm) Torque in N•m
6 9
7 14
8 23
10 45
12 80

Related product manuals