Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
REPAIR AND MAINTENANCE
Hub Motor Replacement Cont.
Required Tools: Phillips screwdriver, 13 mm wrench, awl for opening out wire prongs.
Battery Replacement
Required Tool: Phillips screwdriver.
21 Replace six (6) Phillips head screws using
the Phillips screwdriver.
22 Rotate upright and replace flag.
1 Power switch in OFF position. 2 Remove flag and rotate onto handlebars.
4 Remove front cover plate.
3 Remove six (6) Phillips head screws using the
Phillips screwdriver.
To Next Page
Loading...
