Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Attaching the Seat Cont.
Required Tools: 5 mm Allen wrench, Phillips screwdriver, 13 mm wrench.
ASSEMBLY AND SET-UP
Attaching the Flag
1 Assemble flag as shown and insert flag into
fixed hole located on the rear of the frame.
2 Assembly complete.
9 Tighten four (4) foot pad bolts using the 5 mm Allen wrench.
10 Tighten two (2) seat flat washers and nuts using the 13 mm wrench.
To Next Page
Loading...
