EasyManua.ls Logo

Razor DRIFT RIDER User Manual

Razor DRIFT RIDER
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your product along with the 19 character product I.D. code with you
before contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
DRIFT RIDER™ ELECTRIC DRIFT CYCLE
Question and Answer IconNeed help?

Do you have a question about the Razor DRIFT RIDER and is the answer not in the manual?

Razor DRIFT RIDER Specifications

General IconGeneral
Maximum speed14 km/h
Product colorBlack, Red
Maximum load weight65 kg
Recommended age (min)9 yr(s)
Motor power100 W
Battery life40 min
Battery voltage22 V
Number of batteries supported1
ManualYes
Weight and Dimensions IconWeight and Dimensions
Depth956 mm
Width602 mm
Height596 mm
Weight24350 g

Summary

Safety Warnings

Check and Maintain Drift Rider Conditions

Check guards, wheels, and brakes for serviceability and proper function before use.

Acceptable Riding Practices and Conditions

Obey local laws, ride safely, avoid traffic, use on suitable surfaces, no stunts, one rider only, no night riding.

Proper Riding Attire

Wear helmet, elbow pads, kneepads, long-sleeved shirt, long pants, and closed-toe shoes with tied laces.

Using the Charger

Examine charger for damage, use only recommended charger, adult supervision, do not operate near flammables, unplug when not in use.

Before You Begin

Estimated Assembly and Set-Up Time

Assembly takes 15-20 minutes; initial charge up to 5 hours.

Assembly and Set-Up

Attaching the Frame

Instructions for attaching the frame using 5mm Allen wrenches and coupling bolts.

Attaching the Handlebar Unit

Instructions for attaching the handlebar unit using a 5mm Allen wrench and steering bolt.

Attaching the Seat

Instructions for attaching the seat and foot supports using Allen wrench, screwdriver, and 13mm wrench.

Attaching the Flag

Instructions for assembling and attaching the flag to the rear of the frame.

Usage

Starting the Drift Rider

Turn power ON, place hands on handlebars, apply throttle. Keep feet on foot pads.

Stopping the Drift Rider

Release throttle and apply brake to stop. Practice braking in an open area.

Turning and Maneuvering

Explains simple steering, leaning, and combination turning for control and drifting.

Charging the Battery

Pre-Ride Checklist

Brake

Check brake for proper function, positive action, and no rubbing when released.

Wheels

Inspect wheels for excess wear and avoid hard surfaces.

Frame, Fork and Handlebars

Check for cracks or broken connections, inspect regularly.

Hardware/Loose Parts

Check all parts (nuts, bolts, cables) for security before each ride.

Safety Gear

Wear helmet, elbow pads, kneepads, and appropriate clothing.

Laws and Regulations

Check and obey local laws and regulations for riding locations.

Insurance

Check insurance policies for coverage related to product use.

Repair and Maintenance

Hub Motor Replacement

Step-by-step guide for replacing the hub motor.

Battery Replacement

Step-by-step guide for replacing the battery pack.

Adjusting the Brakes

Instructions on how to adjust the brake cable tension for proper brake function.

Replace Rear Casters

Instructions for removing and installing rear caster wheels using a 5mm Allen wrench.

Cleaning Your Drift Rider

Wipe with a damp cloth; avoid industrial cleaners, solvents, and alcohol-based cleaners.

Battery Care and Disposal

Proper battery storage, handling, and environmentally safe disposal methods.

Charger

Examine charger for damage, use only recommended charger, and use with adult supervision.

Wheels

Inspect wheels for wear and adjust/replace drive train components as needed.

Replacement Parts

Information on purchasing genuine Razor replacement parts.

Repair Centers

How to find authorized Razor repair centers.

Troubleshooting Guide

Drift Rider Parts

FCC Compliance

Warranty

Razor Limited Warranty

Covers manufacturing defects for 90 days, excludes normal wear, improper use, or modification.

Notice: Insurance

Customer Service Contact Information

Americas

Contact details for Razor USA LLC in the Americas region.

Europe, Middle East, Africa

Contact details for Razor USA LLC (Europe) for EMEA region.

Asia

Contact details for Razor USA LLC (Asia) for Asian region.

Distributed in the UK and Ireland by:

Distribution contact for UK and Ireland.

Distributed in Australia by:

Distribution contact for Australia.

Imported in Japan by B-Plus Asia Corp.

Import information for Japan.

Related product manuals