a
Now slide the Mini Back Plate
on the webbing by pointing the
Razor logo of the plate to the
inside and the 2 holes facing the
Butt B Ring.
b
Move the Mini Back Plate so
that it is positioned along with
the scooter loop on the height
where you would wear a belt.
c
Don't forget to place a bicycle
tire inner tube right above
the Mini Back Plate. It will be
used to store the backup web-
bing of the lumbar strap.
A
B
C
24
4 Rigging the Razor Harness 2.5
Step 1: Rigging the Razor Harness
Mini Back Plate and bicycle tire inner tube
To Next Page
Loading...