a
Now put on the Bungee Tri-glide to the webbing and
as well place the Delta Shoulder Plate on the lumbar
strap.
b
You can run the webbing double through the wide
slots of the Bungee Tri-glide.
c
Once placed you should see the Razor engraved
logos on the outside of the harness on the
same side as the the scooter D Ring is.
C B
A
25
4 Rigging the Razor Harness 2.5
Step 1: Rigging the Razor Harness
Bungee Tri-glide with two attachement holes
To Next Page
Loading...