RBI HEATNET 3.0 Torus Series - Control Settings Menu - Page 3

DEFAULT SETTINGS & MENU ITEM DESCRIPTIONS HeatNet Control V3
Page 113
Control Settings Menu — Page 3
CONFIRM BOX
If the OK button is pressed, the factory set MIN, IGNITION, and
MAXIMUM blower rates will be loaded
CONFIRM BOX
If the OK button is pressed the factory default setting for all menus
are loaded. This does not include the factory calibration values.
SAVE SETTINGS
ON-BOARD
MEMORY
ON-BOARD
MEMORY - USB
DRIVE
The settings can be saved to be restored later. This is useful when
the settings have been incorrectly changed by an unknown source, a
factory reset, or a firmware update is performed.