SAFETY
Read these safety rules and follow them closely.
Failure to follow these rules could lead to loss of
control of unit, severe personal injury or death to you
or bystanders, or result in damage to property or the
machine.
PRACTICES AND LAWS
Practice usual and customary safe working
precautions. Learn applicable rules and laws
in your
area. Always follow the practices set forth in this
manual.
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include
exhaust and evaporative emissions control
system
components required to meet U.S. Environmental
Protection Agency (EPA) and/or California Air
Resources Board (CARB) regulations. Tampering
with emission controls and components by
unauthorized personnel may result in severe fines or
penalties. Emission controls and components can
only be adjusted by RC Mowers or an authorized
engine manufacturer's service center. Contact
RC Mowers concerning emission controls and
component questions.
REQUIRED OPERATOR
TRAINING
Read and understand the Operator's
Manual and decals on the unit. This
information is for your safety and the
proper use of your equipment.
Failure to follow these
instructions and warnings may
cause death or serious injury. If you have purchased
this product from an RC Mowers dealer, the dealer
can provide you with training.
Familiarize yourself and any other operators with all
controls and the safe use of the features of this unit.
If you loan, rent or sell this product to others, provide
them with all manuals.
If you have any questions, please contact us at
888-700-4044 or online at rcmowersus.com. Do not
use this equipment if, after reading the Operator's
Manual and the on-board decals, you have
any
questions about the safe use of this
product.
WARNING: Avoid Injury
This cutting machine is capable of
amputating body parts
and throwing
objects. Failure to observe the safety
instructions in the manual and on decals
could result in serious injury or death.
ALWAYS disengage blades, stop unit
and engine, remove key, set parking
brake, and allow moving parts to stop
before leaving operator’s position
SAFETY ALERT SYMBOL
This is the safety alert symbol. It
means:
•
ATTENTION!
•
YOUR SAFETY IS
INVOLVED!
When you see this symbol:
•
BECOME ALERT!
•
OBEY THE MESSAGE!
SIGNAL WORDS
The safety alert symbol above and signal
words
below are used on decals and in this
manual. Read
and understand all safety
messages.
1. Danger
DANGER: Indicates an
IMMINENTLY
HAZARDOUS
SITUATION If not
avoided,
WILL RESULT in death or
serious injury.
2. Warning
WARNING: Indicates a
POTENTIALLY
HAZARDOUS
SITUATION If not
avoided,
COULD RESULT in death or
serious injury.
3. Caution
CAUTION: Indicates a
POTENTIALLY
HAZARDOUS SITUATION If not
avoided, MAY
RESULT in minor or
moderate injury. It may also be used to
alert
against unsafe practices.
2
To Next Page
Loading...
