Copyright © 2015 RCA Communications Systems
19
BR250
TM
Professional Two-Way Radio Instruction Manual
2. Firmly plug the audio accessory into the
accessory jack and secure the screw. See
Figure 10. Warning!! Over-tightening
accessories may cause damage to the radio
that is not covered under warranty.
3. To remove the audio accessory from the
jack, turn the screw counter-clockwise and
remove the accessory.
Attaching/Removing the Earpiece/
Microphone
1. Open the accessory cover without removing
it, as shown in Figure 9.
Figure 9
Figure 10
To Next Page
Loading...
