Recording
10
Setting Recording Condition
You can select between two recording conditions.
• CONF (Conference) - in a more open area and
recording source is far from the unit.
• DICT (Dictation) - in a more enclosed area and
recording source is close to the unit.
1. Press repeatedly until OPTION and
DICT or CONF show on display.
2. Select recording condition.
3. Confirm selection. (You may press
STOP to exit from further selection.)
Setting Recording Quality
You can select between two recording qualities.
• SP (Standard Play) - medium quality, allows about
96 min recording on 4MB SmartMedia
TM
card.
• HQ (High Quality) - high quality, allows about 16
min recording on 4MB SmartMedia
TM
card.
1. Press repeatedly until OPTION and
SP or HQ show on display.
2. Select recording condition.
3. Confirm selection. (You may press
STOP to exit from further selection.)
OPTION
OPTION
Setting Recording Mode
You can select between two recording modes -
manual recording and AVR (automatic voice
recording). Read the following pages for operation
details.
EN
OPTION
OPTION
5007 IB 3/27/00, 4:20 PM11
To Next Page
Loading...
