RCA DRC62705E24G - System Setup

EN - 20
TV Display
Pan Scan
• When wide-screen video is played, this mode clips the right
and left sides of the image so that it can be viewed on a
conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode
playback are automatically played in letterbox mode (black
bands that appear at the top and bottom of the screen).
LetterBox
• When wide-screen video is played in this mode on a
conventional screen, black bands appear at the top and bottom
of the screen.
Wide Screen
• Thisisthecorrectmodeforplayingwide-screenvideosonthe
unitscreenorotherexternalwide-screens.
Note:
• ThedisplayablepicturesizeispresetontheDVD.Thereforethe
playback picture of some DVDs may not conform to the picture
size selected.
• When you play DVDs recorded in the 4:3 aspect ratio, the
playback picture will always appear in the 4:3 aspect ratio
regardless of the TV display setting.
• Select Wide Screen to conform the LCD screen on the unit.
Always be sure that your TV display conforms to the actual TV
in use if you connect the unit to a TV.
Default
It takes 3-5 seconds to reset the DVD settings to the factory
default.
Cut off when a
wide-screen video
image is played
Pan Scan
LetterBox
Wide Screen
System Setup
1. Press the SETUP button on the remote
control in stop mode (when disc is not
playing).
2. Press the
or button to select System
Menu.
3. Use the
or button to select the option
(Tv Display or Default), then press the
button.
4. Use the
or button to adjust the
settings, then press ENTER button to
conrm.
5. Repeat steps 3 and 4 above to adjust other
options. Press the
button to return to
the previous menu.
6.ToexittheSETUPMENUandreturntothe
normal screen, press the RETURN or SETUP
button.