RCA RPJ280 12HSC

Questions and Answers:

C
cnguyenAug 8, 2025
Why can't I see video from my streaming stick on my RCA RPJ280 12HSC Projector?
- S
  Shawn TaylorAug 8, 2025
  If you're unable to view video from your streaming stick on your RCA Projector, consider the following: 1. Ensure the projector is powered on and set to the HDMI 3 input. 2. Press a button on the streaming stick remote to take the device out of standby or screensaver mode. 3. Verify the correct input (source) is selected on your projector. If necessary, use the projector remote's arrow buttons to choose the right input and press OK. 4. Confirm the streaming stick is securely connected to the HDMI 3 connector on your projector. 5. If problems persist, try disconnecting and reconnecting all cables, including the power cable.
W
William RhodesAug 13, 2025
What to do if my RCA Projector shows 'No Signal'?
- K
  kevin77Aug 13, 2025
  If your RCA Projector isn't displaying an image or shows a 'No Signal' message, try these steps: 1. If the power light isn't on, ensure the projector is plugged into a working power socket and switched on, then press the power button. 2. Make sure the lens cover is removed. 3. Verify that all cables are securely attached as instructed in the User Manual. 4. Select the correct image source by pressing the Home button on the control panel or remote. 5. Check the Video input signal setting in the Menu to ensure it's correctly configured.
B
Brian DavisAug 18, 2025
How to fix image wider at the top/bottom on RCA RPJ280 12HSC Projector?
- D
  davischristopherAug 18, 2025
  The image being wider at the top or bottom of the screen, also known as keystone, happens when the projection angle isn't perpendicular to the screen. To fix this on your RCA Projector, use the projector's built-in keystone function to adjust the image.
W
William PadillaAug 23, 2025
Why has the image brightness faded on my RCA RPJ280 12HSC?
- C
  Cynthia BaldwinAug 23, 2025
  The fading image brightness on your RCA Projector could be due to ambient light in the room. Try operating the projector in a dark environment.
J
Judy ThomasAug 28, 2025
Why does the lamp keep switching on my RCA RPJ280 12HSC?
- E
  Edward WilsonAug 28, 2025
  If the warning light indicator is red on your RCA Projector, follow these steps: 1. Allow the projector to cool down for a few minutes. 2. Check that the ventilation vents are not blocked. 3. Ensure the air filter is clean; clean it if needed. 4. Turn the projector back on. If the issue continues, contact service assistance for further help.
E
Evelyn JonesSep 2, 2025
What to do if I see spots on the screen of my RCA Projector?
- L
  Lisa GloverSep 2, 2025
  To address spots on the screen of your RCA Projector, try cleaning the lens with a vacuum cleaner. If the issue remains after cleaning, contact service assistance for further help.

RCA RPJ280 12HSC Specifications

General

Brightness	2800 Lumens
Contrast Ratio	2000:1
Lamp Life	30, 000 hours
Display Technology	LCD
Resolution	1280 x 720
Connectivity	HDMI, USB, VGA, AV
Projection Distance	1.5m to 5m
Keystone Correction	Manual, ±15°
Speaker	3W
Projection Size	30" to 150"
Image Size	30" to 150"
Aspect Ratio	16:9

Summary

Important Safety Instructions

General Safety Guidelines

Covers handling, usage near water, cleaning, ventilation, heat sources, power cords, attachments, and servicing.

Additional Warnings and Precautions

Usage Restrictions

Details restrictions on looking into the light, touching the lens, using near water, blocking vents, and using near heat sources or strong magnetic fields.