E
Edward FowlerAug 7, 2025
What to do if my RCA RPJ241-COMBO-BLACK-V shows 'No Signal'?
- CCynthia TaylorAug 7, 2025
If your RCA Projector displays a 'No Signal' message, here are some things to check: * Ensure the power light is on. If it's off, verify the projector is properly plugged into a working outlet and press the power button. * Make sure the lens cover has been removed. * Confirm that all cables are securely attached as described in the User Manual. * Verify the correct image source is selected by pressing the Source button on either the Control Panel or the Remote. * Check the Video input signal setting in the Menu to ensure it is correctly configured.