Using DVD playback
1. Press the button to turn on unit and the power indicator light GREEN.
2. Press the /SOURCE button to enter and use buttons to search the DVD mode.
3. Open the disc cover and insert a playable DVD or CD disc, make sure the label
side is facing up, and then close disc cover.
4.The player will scan the disc, and then the layback will start automatically.
If a disc menu appears on the screen, see "Using the disc menu" for details.
5. Press button to fast search forward and rewind.
6. Press button to search next or previous file.
7. During playback, press the button to pause and press again to resume.
OK
Using Bluetooth Playback
Pairing is the term used when two Bluetooth devices are connected wirelessly
for the first time. This allows the devices to see each other and sets up a one to
one communication channel between both devices.
Bluetooth Connection
1. Press the button to turn on unit.
2. Press the button to enter the menu screen.
3. Use the button to select right side menu.
4. Use the button to select Bluetooth
column.
5. Press the button to enter Bluetooth menu.
6. Use the button to select “ ON”
7. Turn on your External Bluetooth Speaker and select to Bluetooth pairing
mode
8. A few seconds, you hearing “ do” sound that your unit and external
Bluetooth speaker connected.
9. After connection completed, the unit sound to External Bluetooth speaker.
Disconnect the Bluetooth
1. Press the button to enter the menu screen.
2. Use the button to select above menu.
3. Use the button to select Bluetooth column.
4. Press the button to enter Bluetooth menu.
5. Use the button to select “ OFF” that the Bluetooth disconnect.
Note: When the BT can't connect to this device automatically. Please enter to the
Bluetooth setup menu and select to the BT Reset to reset it, after that the BT device
will be connected with this Projector automatically.
15
OSD Language English
Restore Factory Default
Panel Rotate 0
Info
Bluetooth
To Next Page
Loading...
Need help?
General
