Fine Setting of the Components
The receiver has pre-selectecl surround mode once
you turn on the unit by pressing the Source Buttons
(like DVD, SAT, CD) directly. The default surround
modes for different components are listed in the
table below.
If you decide to change the surround mode, you can
press the SURR MODE repeatedly to toggle among
the different surround mode choices and select the
one you want.
DTS I "_
DOLBY PROLOGIC/ ._ Stereo
DOLBY DIGITAL
DVD Dolby Digital/DTS PRO LOGIC
SAT Dolby Digital/DTS PRO LOGIC
VCR N/A PRO LOGIC
V-AUX N/A PRO LOGIC
TV Dolby Digital/DTS STEREO
CD STEREO STEREO
TAPE N/A STEREO
TUNER N/A STEREO
The receiver will keep the last selection in memory.
Prologic even with Digital Input
To Next Page
Loading...
Need help?
General
