22
Recording Speeds
Press SPEED to select a recording speed.
• SP (Standard Play) gives the best quality recording.
That is why most pre-recorded, rental tapes are
recorded in SP. Fewer programs can be recorded on
the tape.
• SLP (Super Long Play) gives three times the
recording time of tapes recorded in SP. Special
effects such as pause, slow motion, picture search,
and frame advance work in this speed.
• LP (Long Play) gives twice the recording time of
tapes recorded in SP. Special effects are not
recommended in this speed.
Note: LP speed is only available in playback mode.
Recording Pause
This feature allows you to prevent recording short
passages of unwanted material.
• Press PAUSE during recording to temporarily stop
and start recording.
While the tape is paused, the front panel indicator
light inside the REC button will flash.
The TV/VCR will automatically switch from pause
to stop after a few minutes to prevent tape wear.
Recording a Program
SLP
Tape Speed Indicator
Recording Features
To Next Page
Loading...
