RCA T25062 User Manual

TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
7. Put Channels into Memory (Auto Channel Search)
After you enter your Time Zone and Daylight Savings Time
information, the Auto Channel Search begins automatically.
If you need to run the Auto Channel Search after the initial setup,
follow these directions:
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 1 to start Auto Channel Search. You will need to re-enter your
Time Zone and Daylight Savings Time information first. Then, allow
the TV/VCR to search for all channels. Pressing any buttons during
Auto Channel Search will stop the search and only some channels
will be in the TV/VCR’s memory. When the search is finished, the
TV/VCR will automatically tune to the first channel in the channel
memory list.
8. Select the language.
(Escoja un idioma./Choisissez une langue.)
This feature lets you select English, Spanish, or French as the language
for your on-screen displays.
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 6 to display the LANGUAGE/IDIOMA/LANGUE menu.
C. Choose the language for your on-screen displays.
• Press 1 to select English. English is the default language when
you first turn on the TV/VCR.
• Press 2 to select Spanish.
• Press 3 to select French.
9. Set the Signal Type (optional)
The TV/VCR automatically selects the signal type (cable or antenna)
when you run the Auto Channel Search in step 7. If you want to
change the signal type, follow the directions below.
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 4 to toggle the Signal Type between ANTENNA and CABLE.
• After changing the signal type, you may need to re-enter the
channel number you are trying to receive.
• After changing the signal type, you will need to Auto Channel
4
Setting Up the TV/VCR
Startup
SETUP
1 Auto Channel Search
SETUP
1 Auto Channel Search
2 Add/Remove Channels
3 Auto Repeat
4 Signal Type: CABLE
0 Exit
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
6 Language/Idioma/Langue
LANGUAGE/IDIOMA/LANGUE
Select a language.
Escoja un idioma.
Choisissez une langue.
1•English
2 Espanol
3 Français

RCA T25062 Specifications

General

Brand	RCA
Model	T25062
Category	TV VCR Combo
Language	English