EasyManua.ls Logo

RCA T25062

RCA T25062
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
Recording a Program
Timer Recording
PLAY
AUDIO IN
REW
F FWD
PAUSE
POWER
CH CH
VOL-
VOL+
VIDEO IN
TIMER
STOP/EJECT
REC
POWER
TIMER Indicator
Timer recording lets you program the TV/VCR to record up to eight different programs.
This is useful if you plan on being away from home for a long period of time. Before setting
the timer, make sure that the clock is set correctly.
Setting a Timer Recording
1. Press MENU to display the TV/VCR MAIN MENU.
2. Press 3 to display the TIMER RECORDINGS menu.
3. Press 1 to Create a New Program.
4. Press 1, 2, 3,or4 to select the type of program.
1 One time — single program recorded once.
2 Daily — program recorded at same time every day.
3 Weekdays — program recorded at same time Monday
through Friday.
4 Weekly — program recorded at same time once a
week.
5. Use the number buttons to enter the channel number,
start time including AM or PM, end time, and start date
of the recording. Just follow the on-screen prompts.
To record from the AUDIO/VIDEO IN jacks, press 00.
Two selections appear in the channel field. Press 1to
select VIDEO 1, the rear AUDIO/VIDEO IN jacks. Press 2
to select the front panel AUDIO/VIDEO IN jacks.
Press CLEAR to correct an entry.
6. Press 1 or 2 to select a recording speed.
Note: LP Speed is only available in playback mode.
7. Press MENU to save your program.
8. Repeat steps 3 – 6 for additional programs.
9. Insert a tape with safety tab intact before the recording is
to begin.
The TIMER indicator lights in the TV/VCR’s
front panel.
If you turn the TV/VCR off, the TIMER indicator will
flash if there is no cassette in the TV/VCR or the safety
tab is missing from the cassette.
10. If using a cable box, turn it on and tune it to the channel
you want to record before time for the recording to begin.
TIMER RECORDINGS
1 Create a New Program
2 Review existing Progs.
When should this program
occur?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
Program 1 (One Time)
Program 1 (One Time)
Channel 08
Start Time --:--
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time --:--
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 07/18/99 Sun
Tape Speed SLP
1=SP 2=SLP
Press CLEAR to correct
Press MENU to exit

Table of Contents

Related product manuals