RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH
HAS BEEN DESIGNED TO GUARANTEE RELIABILITY AND HIGH
PERFORMANCE.
CONNECTIONS
WARNING: loudspeaker connections should be only made by qualified and
experienced personnel having the technical know-how or sufficient specific
instructions to ensure that connections are made correctly and to prevent any
electrical danger.
To prevent any risk of electric shock, do not connect loudspeakers when the
amplifier is switched on.
Before turning the system on, check all connections and make sure there are
no accidental short circuits.
The entire sound system shall be designed and installed in compliance with
the current local laws and regulations regarding electrical systems.
On the loudspeaker bottom, there are the screw terminals for the 100 V
constant voltage line connection coming from an amplifier. It is possible to
choose among 3 different power values (CS 3041: 10 – 15 – 20 W, CS 3082:
10 – 20 – 30 W).
Note: a 70 V coNNectioN (iNstead of 100 V) eNtails that the selected power is halVed.
WARNING
CS 3041 and CS 3082 are sound columns that are ideal for speech
reproduction, with a shape designed to allow corner installation.
The extruded aluminium body and its metal grille are painted in white RAL
9016.
The wall mounting accessories are included.
CS 3041
Four extended range 2” loudspeakers and one 1” tweeter.
Built-in multi-tapped transformer (10 – 15 – 20 W) for 100 V constant
voltage connection.
A 16 ohm input is available on the terminal strip.
CS 3082
Eight extended range 2” loudspeakers and two 1” tweeters.
Built-in multi-tapped transformer (10 – 20 – 30 W) for 100 V constant
voltage connection.
A 8 ohm input is available on the terminal strip.
DESCRIPTION
CS 3041
CS 3082
To Next Page
Loading...
Need help?
General
