RCF M 18 - Page 19

RCF spa
M 18 Digital Mixer User’s Manual
19
Inputs
11
-
1
8
Hardware inputs from 11
to 18 have line
connections, with the
option to switch between
-10dBV and +4 dBu
sensitivity.
INV and HPF other
controls are identical to
the other inputs, as you
can see on the right.
Stereo Player (from USB flash drive)
TK USB inputs are managed as a
stereo input by default, but you can
always unlink them in SETTINGS >
GLOBAL page.
As the audio is directly generated in
digital, there is no need for PRE or
DYNAMICS.
When you have a stereo track, the
typical use is in stereo (linked)
mode.
If you have a mono backing track on
one channel, and the metronome
click on the other, then you may
work in dual mono mode, which
allows you independent pan and
mixing controls.