21
FADERS > SEND view
For each of the input channels, the SEND page allows the accurate settings of three FX and six AUX sends.
FX sends are always post-fader, thus allowing the channel level to affect FX send levels, maintaining the desired
balance. AUX1-AUX4 sends are always pre-fader, thus allowing to set the required level independently from channel
level settings – this solution is ideal for stage monitoring. AUX5 and AUX6 can be set pre or post fader independently
for each input channel.
The central part of this page has 3 faders for FX sends and six faders for AUX send levels. Each of the FX send faders
feature a Mute button. To choose the effects of the three sends, please go to the EFFECTS tab.
To Next Page
Loading...
