Need help?Do you have a question about the RCF SUB 702-AS and is the answer not in the manual?
General| Max SPL | 129 dB |
|---|---|
| Amplifier Power | 700 W RMS |
| Peak Power | 1400 W |
| Driver Size | 12 inch |
| Input Connectors | XLR, Jack |
| Output Connectors | XLR |
| Protections | Thermal, RMS |
| Limiter | Fast limiter |
| Cooling | Convection |
| Material | Baltic birch plywood |
| Hardware | Pole mount |
| Controls | Volume, EQ |
| Connections | XLR, Jack |
| Woofer | 12" |
Instructions for connecting the unit to the mains, checking voltage, and ensuring proper earthing.
Precautions against liquids, objects, and naked sources near the apparatus to prevent short circuits.
Prohibits unauthorized modifications and specifies conditions requiring service centre intervention.
Instructions for immediate action on strange odors/smoke and disconnecting power during long periods of non-use.
Guidance on connecting equipment, safe anchoring, and stacking procedures to prevent falling.
Strongly recommends professional installation and compliance with electrical system regulations.
Ensures equipment is used only on manufacturer-recommended supports and trolleys for stability.
Highlights mechanical and electrical factors to consider when installing professional audio systems.
Warns about permanent hearing loss from high sound levels and advises using protective devices.
Keep product away from heat, ensure ventilation, avoid overload, forcing controls, and using solvents.
Details on high-quality materials, precision manufacturing, and user-focused design.
Information on the 1000 Watt Digital Amplifiers, their output, distortion, and sound quality.
Describes the birch plywood cabinets, ergonomics, and integrated handles and pole mount.
Details stereo jack/female XLR inputs and male XLR outputs for signal linking or crossover.
Explains LEDs (Limiter, Signal, Status, Power) and controls like Volume, Link/Xover, and Phase switches.
Details crossover frequency selection (80/120 Hz) and AC power connections with the main switch.
Specifies the AES standard for XLR connector pinouts: Ground, Hot (+), and Cold (-).
Guides on voltage selection, connecting power/signal cables, and safe power-on sequence to prevent noise.
Covers speaker stand mounting, rigging points, and a warning against using handles for suspension.
Explains protection LEDs and notes that voltage setup is reserved for authorized service centres.
Details frequency response and maximum SPL for SUB 705-AS and SUB 718-AS models.
Specifies crossover points and details the transducers (size, voice coil) for each model.
Lists total amplifier power, power input type, signal inputs/outputs, and controls.
Provides dimensions, net weight, and color for both SUB 705-AS and SUB 718-AS models.
To Next Page
