Need help?Do you have a question about the RCF SUB 905-AS II and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Frequency Response | 35 Hz - 120 Hz |
| Max SPL | 133 dB |
| Amplifier Power | 1100 W RMS |
| Output Connectors | XLR |
| Protections | Thermal, RMS |
| Cooling | Convection |
| Cabinet Material | Baltic birch plywood |
| Hardware | Pole mount |
| Woofer | 15" |
| Input Connectors | XLR |
| Crossover Frequencies | 80 Hz |
| Controls | Volume, Phase |
| Connections | XLR |
| Handles | 2 |
Covers general safety precautions, mains voltage risks, and proper connection procedures for safe operation.
Details on preventing liquid ingress, handling malfunctions, and procedures for long-term storage.
Addresses unusual emissions, connection safety, installation requirements, and proper use of supports.
Discusses factors in professional systems and risks of permanent hearing loss from high sound levels.
Guidance on preventing noise, heat management, avoiding overload, and cleaning procedures.
Emphasizes reading the manual and protecting the product from rain or humidity to prevent hazards.
Details on woofer features like magnet assembly, voice coil, and cabinet construction for performance.
Description of input connectors, controls, processor functions, and amplifier specifications.
Details on stereo XLR inputs, link/XOVER outputs for signal routing and daisy-chaining.
Explanation of system display, input sensitivity, crossover, delay controls, and status indicator lights.
Information on PowerCON AC input and output link connectors for reliable power supply.
How to use the rear encoder for gain reduction, time delay, and select various frequency presets.
Details on XLR connector pinout and the correct sequence for powering on the speaker safely.
Instructions for cardioid system configuration and crucial warnings regarding installation safety.
Details on internal fuse types, values, and replacement procedures for servicing.
Specifications for frequency response, Max SPL, Woofer, input connectors, and input sensitivity.
Details on crossover, protections, limiter, amplifier power, cooling, dimensions, weight, and cabinet.
To Next Page
