Need help?Do you have a question about the RCF SUB 8005-AS and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Connections | Powercon IN/OUT |
| Cabinet Material | Baltic birch plywood |
| Weight | 35kg |
| Frequency Response | 30 Hz - 120 Hz |
| Total Power | 1250 W RMS |
| Woofer | 4.0" voice coil |
| Input Signal | Balanced / Unbalanced |
| Input Connectors | XLR |
| Output Connectors | XLR |
| Crossover Frequencies | 80 Hz |
| Protections | Thermal, RMS |
| Controls | Volume, EQ, Phase, Xover |
| Cooling | Convection |
| Hardware | M20 Pole Mount |
| Dimensions (H x W x D) | 580mm x 460mm x 560mm |
| Enclosure Material | Plywood |
| Input Sensitivity | +4 dBu |
Details on connecting the product to the mains power supply safely, including plug types and cable protection.
Describes XLR input and output connectors for signal linking and daisy chaining.
Covers sensitivity, equalization (Deep/Punch), crossover, and time delay settings.
Explains AC power input, output, and main switch connections using PowerCON.
Provides essential steps and warnings for connecting and powering on the speaker safely.
To Next Page
