Need help?Do you have a question about the RCF SUB 705-AS MK3 and is the answer not in the manual?
General| Frequency Response | 40 Hz ÷ 120 Hz |
|---|---|
| Max SPL | 131 dB |
| Amplifier Power | 1400 W Peak, 700 W RMS |
| Input Connectors | XLR, Jack |
| Output Connectors | XLR |
| Input Sensitivity | -2 dBu / +4 dBu |
| Protections | Thermal, RMS |
| Limiter | Soft Limiter |
| Cooling | Convection |
| Cabinet Material | Baltic birch plywood |
| Hardware | Pole mount |
| Woofer | 15", 3.0" v.c. |
| Input Signal | Balanced/Unbalanced |
| Controls | Volume, phase |
| Connections | VDE Connector |
| Dimensions | 568 x 430 x 600 mm / 22.36 x 16.93 x 23.62 inches |
| Handles | 2 side |
Covers power supply, preventing liquid ingress, repairs, storage, and hearing protection.
Describes stereo female XLR inputs and male XLR signal/crossover outputs.
Explains limiter LED, signal LED, power LED, volume control, and phase switch.
Details the LINK/XOVER OUT and XOVER switches for signal routing and frequency selection.
Covers IEC AC socket for power cord and the main power switch.
Instructions to verify voltage label and contact service if issues arise.
Lists acoustical, transducer, processor, power, and physical specifications for all models.
To Next Page
