Need help?Do you have a question about the RCF SUB 8003-AS MK3 and is the answer not in the manual?
Acoustical Specifications| frequency response | 35 Hz ÷ 120 Hz |
|---|---|
| maximum SPL at 1 meter | 135 dB |
Transducers| woofer | 18'', 4.0'' v.c |
|---|
Input/Output Section| input signal | bal/unbal |
|---|---|
| input connectors | XLR |
| output connectors | XLR |
Processor Section| crossover frequencies | Selectable |
|---|---|
| protections | Thermal, RMS |
| limiter | Soft Limiter |
Power Section| total power | 2200 W Peak |
|---|---|
| cooling | Convection |
| connections | Powercon IN/OUT |
Physical Specifications| height | 693 mm / 27.28 inches |
|---|---|
| width | 505 mm / 19.88 inches |
| depth | 685 mm / 26.97 inches |
| weight | 37.6 kg / 82.89 lbs |
Acoustical Specifications| frequency response | 40 Hz ÷ 120 Hz |
|---|---|
| maximum SPL at 1 meter | 133 dB |
Transducers| woofer | 15'', 3.0'' v.c |
|---|
Input/Output Section| input signal | bal/unbal |
|---|---|
| input connectors | XRL Stereo |
| output connectors | XRL Stereo |
Processor Section| crossover frequencies | Selectable |
|---|---|
| protections | Thermal, RMS |
| limiter | Soft Limiter |
Power Section| total power | 2200 W Peak, 1100 W RMS |
|---|---|
| cooling | Convection |
| connections | Powercon IN/OUT |
Physical Specifications| height | 590 mm / 23.23 inches |
|---|---|
| width | 420 mm / 16.54 inches |
| depth | 590 mm / 23.23 inches |
| weight | 26 kg / 57.32 lbs |
Key operational warnings, handling advice, and disposal information for the product.
Guidance on connecting the product to the mains, including voltage checks and cable safety.
Covers safe handling, maintenance, installation, environmental exposure, and operational safety guidelines.
Instructions for the proper recycling and disposal of waste electrical and electronic equipment (EEE).
Advice for ensuring long-life service, including setup in cold environments and cleaning procedures.
Overview of the high power, high output active subwoofer systems, detailing design features and specifications.
Details on XLR input and output connectors for audio signals and daisy-chaining.
Explanation of the encoder and display for system setup, parameter adjustment, and setting values.
Information on LEDs for power, gain reduction, delay, signal presence, preset, and limiter status.
Description of the LINK/XOVER selector and AC power input/output connectors.
Important warnings regarding electrical safety, connections, and system installation compliance.
Instructions for adjusting input gain reduction and speaker delay using the rear encoder.
Guide to selecting and applying various presets for different frequency responses and applications.
Procedure for saving customized parameter settings into the speaker's memory.
Instructions for creating subwoofer cardioid systems using groups of two or three modules.
Details on balanced wiring for male and female XLR connectors according to AES standards.
Pre-connection checks, voltage verification, and safe powering-on procedures.
Information on the built-in protection circuits for audio signal and distortion control.
Details on voltage configurations and required fuse values for different regions.
Steps to troubleshoot issues when the speaker does not power on.
Guidance for resolving issues with no sound, low volume, or hissing.
Troubleshooting distorted sound and frequently blinking overload LED.
Steps to diagnose and resolve humming or buzzing noise issues.
Detailed dimensional drawings and measurements for the SUB 8003-AS MK3 subwoofer.
Detailed dimensional drawings and measurements for the SUB 905-AS MK3 subwoofer.
Comprehensive list of technical specifications for both SUB 8003-AS MK3 and SUB 905-AS MK3 models.
To Next Page
