Need help?Do you have a question about the RCF SUB 8008-AS and is the answer not in the manual?
Covers mains voltage risks, proper connection, earthing, cable protection, and avoiding unauthorized disassembly.
Advises against liquids, extreme conditions, and using incompatible accessories; emphasizes proper storage.
Stresses professional installation, careful use of supports, and avoiding exposure to heat or damage.
Warns of hearing loss from high sound levels and advises on using screened cables for signal integrity.
Guidance on proper recycling of the product according to WEEE directive and national laws.
Advice for product longevity, including outdoor use, cold environments, and cleaning procedures.
Details the subwoofer's powerful 18" woofers, 4400W Class-D amplifier, and versatile housing for system integration.
Emphasizes that loudspeaker connections must be made by qualified personnel to prevent electrical dangers.
Describes the female XLR inputs and male XLR signal outputs for system connectivity.
Explains the encoder for system setup, gain reduction, delay, and signal indication LEDs.
Details the preset/limiter LED function and the system setup display for monitoring settings.
Covers the selector for LINK/XOVER modes and the PowerCON TRUE1 TOP IP-rated power input.
Describes the AC output link for powering additional speakers, including power ratings and fuse information.
Details the wiring standards for XLR and TRS connectors, including pin assignments for balanced and unbalanced signals.
Advises verifying the voltage label and contacting support for voltage discrepancies before connecting.
Provides instructions on connecting power/signal cables, setting volume to minimum, and powering on sequence.
Mentions the built-in protection circuits that control level and maintain distortion for gentle signal management.
Illustrates the setup for using a single subwoofer unit.
Explains the setup for a cardioid configuration using two subwoofers, including specific settings.
Details the setup for a cardioid configuration with three subwoofers, including specific settings and presets.
Steps to diagnose and resolve issues when the speaker fails to power on.
Guidance on checking signal source, cables, and mixer output levels for sound issues.
Advice on reducing output level when the overload LED blinks frequently due to distortion.
Troubleshooting low volume or hissing sound by checking source gain and signal quality.
Recommendations for resolving humming or buzzing by checking AC grounding and connected equipment.
Details frequency response, SPL, woofers, input/output, processor, and power section.
Lists CE marking, cabinet material, hardware, handles, grille, color, and size dimensions.
To Next Page
General
