Need help?Do you have a question about the RCF ART-902-AS 7 Series and is the answer not in the manual?
Key safety measures to prevent electrical hazards, damage, and ensure proper use.
Guidelines for preventing noise on signal lines by using screened cables.
Guidelines for safe operation, ventilation, and preventing damage to controls.
Details on transducers, amplifiers, and cabinet construction for the ART 7 Series.
Description of stereo jack/female XLR inputs and their acceptance of input connectors.
Explanation of limiter LED, signal LED, status LED, power LED, volume control, and switches.
Details on male XLR signal/XOVER output for daisy chaining or crossover output.
Information on IEC AC sockets for power cord and additional power link, and the main power switch.
Details on the AES standard for XLR connectors (PIN 1=GROUND, PIN 2=HOT, PIN 3=COLD).
Instructions for verifying voltage selector and connecting cables before turning on.
Information on pole mount socket and warning against suspending by handles.
Explanation of LED indicators for amplifier status and protection circuit operation.
Fuse values for 230V/50Hz and 115V/60Hz setups, reserved for service center.
Frequency response, Max SPL, and Crossover Point for ART 902-AS and ART 905-AS.
Specifications for low frequency transducers, including voice coil size.
Details on total power for the amplifiers in the ART 7 Series subwoofers.
Overview of signal input/output, power input, and control types.
Information on equalization, crossover filtering, and limiter types for analog input.
Size, weight, and color options for the ART 7 Series subwoofers.
To Next Page
General
