Need help?Do you have a question about the RCF ART-905-AS 7 Series and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Max SPL | 132 dB |
| Driver Size | 15" |
| Weight | 36.4 kg / 80.24 lbs |
| Hardware | M20 |
| Handles | 2 |
| Pole Mount/Cap | Yes |
| Peak Power | 2000 W |
| Output Connectors | XLR |
| Phase Switch | Yes |
| Power Output | 1000 W |
| Frequency Response | 40 Hz - 120 Hz |
| Woofer | 15" Woofer |
| Protections | Thermal |
| Controls | Volume |
| Enclosure Material | Plywood |
| Amplifier Power | 1000 W |
| Input Connectors | XLR |
| Limiter | Built-in Limiter |
Comprehensive safety instructions to prevent electrical shock, fire, hearing loss, and equipment damage during use and installation.
Guidelines for using screened cables and avoiding interference from electromagnetic fields and mains cables for optimal audio quality.
Advice on ventilation, avoiding heat sources, overload, control handling, and cleaning procedures for the unit.
Background on RCF's ART Series evolution and the design philosophy behind the ART 7 Series, including key components.
Description of XLR/Jack inputs and XLR loop-through/Xover output for connecting audio sources and daisy-chaining speakers.
Explanation of Limiter, Signal, Status, and Power LEDs, indicating operational status and protection.
Details on Volume, Link/Xover, Crossover, and Phase switches for adjusting sound output and configuration.
IEC AC sockets for power input and linking, and the main power switch for turning the unit ON and OFF.
XLR connector pinout (AES standard) and initial verification of the voltage selector for proper operation.
Procedure for connecting cables, setting volume to minimum, and powering on the mixer and speaker correctly.
Information on pole mount socket, rigging warnings, and explanations of protection LEDs.
Specific fuse values required for 230V and 115V voltage configurations, reserved for service centers.
Frequency response, Max SPL, and Crossover Point data for the ART 7 Series subwoofers.
Details on the low-frequency transducers, including size and voice coil specifications.
Total power output, signal input/output types, power input connector, and control features.
Physical dimensions, weight, and color options for the ART 7 Series subwoofer models.
To Next Page
