Need help?Do you have a question about the RCF SUB 8004-AS and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Power Output | 800 W RMS |
| Peak Power | 1600 W |
| Driver Size | 18" |
| Output Connectors | XLR |
| Input Signal | Balanced/Unbalanced |
| Depth | 600 mm |
| Frequency Response | 30 Hz - 120 Hz |
| Input Connectors | XLR |
| Enclosure Material | Plywood |
| Woofer Voice Coil | 4.0" |
| Crossover Frequencies | 80 Hz - 120 Hz |
| Protections | Thermal, Short Circuit |
| Controls | Volume, Crossover, Phase |
| Connections | XLR, Jack |
| Handles | 2 |
Selects the manual language to English.
Selects the manual language to Italian.
Crucial safety information regarding mains voltage, connections, and earthing.
Guidelines to prevent internal damage from liquids, objects, and unauthorized repairs.
Precautions for product use, including power disconnection, handling unusual emissions, and proper connections.
Recommends professional installation and safe use of mounting supports and trolleys.
Advice on preventing hearing loss from high sound levels and managing signal cable noise.
Operating advice: avoid heat, overloading, force, and improper cleaning agents.
Emphasizes reading the manual and warns against exposing the product to rain or humidity.
Introduction to the high output active subwoofer systems and their design philosophy.
Detailed features of the 18" woofers, including magnet, voice coil, and cone.
Description of connectivity options, sensitivity control, and DSP setup switches.
Information on amplifier modules, construction, and cabinet materials for vibration dampening.
Details on main signal input, link output, and crossover output XLR connectors.
Explanation of sensitivity, DEEP-PUNCH, XOVER, and time delay controls.
Description of status indicators (Power, Signal, Limiter) and the main power switch.
Information on AC power connection, voltage setting, and fuse compartment.
Standard AES pinout for XLR signal connectors (Hot, Cold, Ground).
Step-by-step guide for connecting cables and powering on the unit safely.
Instructions for setting time delay and configuring cardioid patterns for multiple units.
Guidelines for safely stacking subwoofer units with other RCF systems.
Critical warnings against suspending by handles and exceeding power limits.
Specific fuse ratings required for different voltage configurations of the subwoofers.
Kits for swivel and fixed wheels to facilitate moving the subwoofers.
Accessories for fly bar connection and various power cables.
Technical data including frequency range, maximum SPL, and crossover points.
Specifications for amplifiers, low-frequency drivers, and connections.
Overview of DSP processing capabilities and physical dimensions, weight, and materials.
To Next Page
