18
RIGGING PROCEDURE
RIGGING THE SYSTEM FOLLOW THE PROCEDURE:
H RIGGING CHAIN HOIST
S CERTIFIED SHACKLE
F FLY BAR
1 Connect the fl y-bar F to the chain hoist H (o motors) using a cer-
tifi ed shackle. Secure the shackle to prevent un-screwing (following
the shackle supplier instructions
and warnings)
2
Connect the second pin on the front bracket to make sure that the
connecting bracket is vertical
3 Connect the front
bracket to the fi rst
TTL33-A/TTL31-A
cabinet using 2 quick
lock pins
To Next Page
Loading...
