RCF TTL33-A - Parts Inspection Check List

43
PARTS INSPECTION CHECK LIST
WARNING
Always check and inspect regularly and before the use all the parts of the system that are used for rigging. Always repla-
ce parts that results damaged or in not perfect conditions. DO NOT USE THE AFFECTED PARTS.
The following parts must be regularly inspected:
• TTL33-A/TTL31-A FLY-BAR
(visual inspection, soldering inspection, screws securely fi xed inspection, pin-holes inspection using a pin)
• QUICK LOCK PINS
(visual inspection, working test)
• FRONT BARS AND FRONT METAL CORNERS
(visual inspection, screws securely fi xed inspection, pin-holes inspection using a pin)
• REAR BARS AND REAR METAL CORNERS
(visual inspection, screws securely fi xed inspection, pin-holes inspection using a pin)
• WOODEN CABINET
(cabinet integrity visual inspection, metal corners securely fi xed inspection, general integrity inspection)
7.
MAINTEINANCE