T-one ULS
Rev. 06/18 9/26
To enter the programming environment keep pressed the enter key for about one second: the display shows
F.1.
To scroll the programming function menu use the up or down keys.
To edit function parameters:
▪
select the desired function number;
▪
press the enter key: the display shows the value set in the function;
▪
press up or down keys and set the desired value;
▪
press enter to confirm.
To exit the programming environment select function 1 and press the down key or select function 78 and
press the up key.
To Next Page
Loading...