Re T-one ULS - Technical Specifications; Analog Section Specifications; Digital Section Specifications; Other Device Characteristics

T-one ULS
Rev. 06/18 23/26
Technical specifications
Analog section
Inputs
For “diameter reference” or “remote setpoint” (see F.30):
 1 analog input AIN0: 420mA
 1 analog input AIN1: 010V / R=10k
Uscite
 1 selectable analog output (torque adjustment on brake/clutch):
- 010V / 10mA max
- 420mA Rload=330max
 1 analog output (proportional to the diameter read): 010V / 10mA max
Resolution
12 bit
Sampling time
30 ms
Digital section
Inputs
2 digital inputs: 24Vdc
Outputs
2 relay output: 24Vdc or 24Vac / 750mA max
Others characteristics
Power supply and consumption
24Vdc / 300mA max
Weight
400 g
Operating temperature
0  50°C
Degree of protection
 Case: IP20
 Frontal panel: IP52