lets you set a Sub-audible tone that
your transceiver must receive to open
squelch.
Touch-Tone Page - lets you set a sequence of up to five
touch-tones your transceiver must
receive to sound an alert tone to open
the squelch.
16-Digit DTMF Memory Sequences - lets you transmitt all touch tones
(0-9, #, *, and A-D).
Dual Power Transmitter - lets you select between 1-Watt and
6-Watt to preserve battery power.
Five DTMF Memory Sequences - lets you store five touch-tone
sequences of up to 15 digits each so
that you can quickly transmit the
sequences you commonly used to
activate repeaters or autopatches, or
other stations equipped with touch-
tone page.
Multi-Function Scanning - lets you scan the standard memories,
priority frequency memories, or a
frequency range, and automatically
resume scanning when the carrier
drops, resume scanning after 10
seconds, or stop scanning when carrier
is detected.
Programmable Frequency Step - lets you set the frequency step for
tuning or scanning to 5, 10, 15, 20,
25, 50, or 100 kHz.
To Next Page
Loading...
