Product Description:
- HF QRP Transceiver, attach battery 12v and ANT and QSO.
- DC IN: 9-13V Max:3A
- Output POWER:10W (44dbm) MAX:15W
- Transmit: 160, 80, 60, 40, 30, 20, 17, 15, 12 and 10-meter amateur bands.
- Receive: 3.5-30 MHz nominal including general coverage, 0.8-32 MHz at reduced specifications.
- MODE: CW, LSB, USB, AM, FM (N, W), SAM, FreeDV
- Bandwidth:300Hz-10Khz Adj
- SWR: Display 1:1 to 5:1 calibrated
Sensitivity/bandwidth
Better than -108 dBm (0.89uV) in a 2.3 kHz bandwidth
Better than -120 dBm (0.22uV) in a 300 Hz bandwidth
Technical Specifications:
Because this is a software-defined radio and due to ongoing modifications/improvements of the
software and hardware, the specifications continue to improve.
- Receiver sensitivity for 10dB S/N, CCITT filtering, taken at 28.3 MHz:
- Frequency Translation enabled:
Better than -111 dBm (0.6uV) in a 2.3 kHz bandwidth
Better than -126 dBm (0.11uV) in a 300 Hz bandwidth
- Frequency Translation Disabled:
Better than -108 dBm (0.89uV) in a 2.3 kHz bandwidth
Better than -120 dBm (0.22uV) in a 300 Hz bandwidth
The above specifications are for a receiver on which the published sensitivity modifications are
performed.
Frequency coverage:
To Next Page
Loading...