Recent RS-918SSB - Filter Selection (MENU_FILTER)

LABEL (NR)
DESCRIPTION
Tune
helper (MENU_CW_DECODER_SNAP_ENABLE)
graphical tune helper: adjust
frequency until yellow vertical
line is in center of green box -
-> right on CW carrier
frequency
Blocksize for
Goertzel (MENU_CW_DECODER_BLOCKSIZE)
How many samples are taken
for the signal detection with
the Goertzel algorithm?
Noise
cancel (MENU_CW_DECODER_NOISECANCEL)
Enable/disable noise canceler
for CW decoder
Spike
cancel (MENU_CW_DECODER_SPIKECANCEL)
Enable/disable spike canceler
or short cancel for CW
decoder
AGC for
decoder (MENU_CW_DECODER_USE_3_GOERTZEL)
Enable/disable AGC for CW
decoder
show CW
LED (MENU_CW_DECODER_SHOW_CW_LED)
Enable/disable LED for CW
decoder
Filter Selection (MENU_FILTER)
LABEL (NR)
DESCRIPTION
SSB Filter 1 (MENU_FP_SSB_01)
Filter bandwidth #1 when toggling with
filter select button in LSB or USB.
SSB Filter 2 (MENU_FP_SSB_02)
Filter bandwidth #2 when toggling with
filter select button in LSB or USB.