Recent RS-918SSB - Debug;Exper. Settings (MENU_DEBUG)

Debug/Exper. Settings (MENU_DEBUG)
LABEL (NR)
DESCRIPTION
Enable Debug Info
Display (MENU_DEBUG_ENABLE_INFO)
Enable debug outputs
on LCD for testing
purposes (touch screen
coordinates, load) and
audio interrupt
duration indication via
green led
CW Shift Keeps
Signal (MENU_DEBUG_CW_OFFSET_SHIFT_KEEP_SIGNAL)
Enable automatic
sidetone correction for
CW OFFSET MODE =
SHIFT. If you tuned in
SSB to a CW signal
around the sidetone
frequency, you'll keep
that signal when going
to CW. Even if you
switch from USB to
CW-LSB etc.
TX Audio via USB (MENU_DEBUG_TX_AUDIO)
If enabled, send
generated audio to PC
during TX.
FT817 Clone Transmit (MENU_DEBUG_CLONEOUT)
Will in future send out
memory data to an
FT817 Clone Info (to be
used with CHIRP).
FT817 Clone Receive (MENU_DEBUG_CLONEIN)
Will in future get
memory data from an
FT817 Clone Info (to be
used with CHIRP).
Show gains (MENU_DEBUG_NR_GAIN_SHOW)
Debugging: show gains
of spectral noise
reduction